Flex SuperCoat™ (AC-50)

Flex-SuperCoat Flex SuperCoat is a very versatile waterbased, self cross-linking Acrylic Polyester/Aliphatic Urethane coating.

It is a high performance topcoat specially formulated to meet the conditions and properties required for plastics, vinyl tile, concrete and wood floor coatings for indoor and outdoor use. Many benefits over wax and epoxy coatings and without any of it’s downside.


  • Waterbased,simple and safe to handle
  • Low odor and VOC
  • Excellent hot print resistance
  • Fast dry and early water resistance
  • Stain resistance (black marker, lipstick, ketchup, ink, crayon, shoe polish, coffee, tea, dye, urine, nail polish, mustard, water)
  • Excellent scrub ability and abrasion resistance
  • Nonflammable
  • Excellent water and chemical resistance
  • Excellent clarity and block resistance
  • Excellent leveling, flow, and micro-form free
  • Excellent adhesion to variety of substrates
  • Mildew resistance
  • UV resistance
  • Very Good Slip Resistance

Slip Resistance Properties

Coefficient Of Friction readings:
Flex SuperCoat Satin (Dry = 0.77, Wet = 0.62)
Flex SuperCoat Gloss (Dry = 0.77, Wet = 0.55)

Technical Data

Colour Clear & Pigmented
Resin Type Acrylic Polyester/Aliphatic Urethane
Percent Solids (A+B) 35 +/-5% (vol.)
Coverage DFT 510 M2/lit @ 25 microns
200-400 ft2/US gal @ 2 Mils
Sheen (600) Gloss (85-90%)
Semigloss (70-80%)
Low sheen (5-20%)
Drying Time @ 75°F
(23°C), 55% Relative Humidity
1 hr – to touch
2 hr – recoat
24 hrs – light traffic
Pot life (2K) 24 hrs
Pencil Hardness (ASTM 3363) H2H
Taber Abrasion Resistance 1000 cycles, CS-10 wheel: 20 mg loss
Reducer/Cleanup Water
Specific Gravity 1.03 +/- 0.01 g/L
8.6 +/-0.05 lb/gal
pH 89.5
V.O.C.(without water) < 185 grams/liter
MSDS Flex SuperCoat MSDS


Do NOT use this product while ambient temperature is less than 10°C (50°F) and humidity is > 60%. Also not recommended to be used in an environment that is constantly wet such as a pool or in an environment that is continuously pressure washed.